Sharing Internet by Windows 7 (By notebook)

Sharing Internet by Windows 7  by notebook (Lan to Wireless)

1. You must design your notebook connect to internet by LAN (wire) and other mobile devices will connect behird your notebook (wireless) 

Figure1

2. Go to "change adapter settings" 

Figure2

3. Next, right click to "Local Area Network" and properties 

 Figure3

4. Go to Sharing tab and click true at "Allow other network  users to connect through this computer's Internet connection"

and choose your wireless is "Wireless Network Connection"  (Some notebook has 2)

Figure4

5. Create your ad-hoc WI-FI,  click "Setup a new connection or network" 

Figure5

6. Click "Setup a wireless ad-hoc (Computer-to-computer) network" and next 

Note: Ad-hoc is not access point (Some mobile device scan only access point)

Figure6

7. Click "Next" 

Figure7

8. Create network name "test-wireless" (example name)

8.1 Security type choose "WEP" (WPA2 is better more than WEP but not support connect from some mobile device)

8.2 Password for WEP is 10 digi-number

Figure8

9. Waiting process until finish.

Figure9

10. Finish and check your result (If wrong, create new is easy more that modify)

Figure10

 11. Check the WI-FI ready and waiting for users.

Figure11

12. Network popup will show but can choose home or work (if not have can skip)

Figure12

13. Next, check WI-FI from another mobile device. (Example)

Figure13

14. Click at test-wireless and click "Join Anyway"

Figure14

15. Type your password 10 digi

Figure15

16. Check your wireless success and check detail.

Figure16

17. Check IP address must as same notebook wireless network. 

Figure17

18. Back to your notebook and check connection must show connected.

Figure18

19. The last one, check your wirless IP address. 

Figure19

20. You can adjust into your network area.

Manual DSL SETUP on DLINK DSL-2750E

Manual DSL SETUP on DLINK DSL-2750E

1. Open IE or Mozila or other browser then type http://192.168.1.1 (Enter) and then will see login page (if not see check your gateway and type it again)

 Figure1 

Figure2

2. See main page

3. Click "SETUP" menu on the top and right side click internet setup

3.1In ATM PVC CONFIGURATION (if not explain leave it to default)

     1) VPI = 0 

     2) VCI = 100

3.2 CONNECTION TYPE

     1) Protocol = PPP

     2) Encapsulation = LLC

 3.3 PPP USERNAME AND PASSWORD

       1) Type your internet username xxxxx@xxxx   (if dont know check with you ISP)

       2  Type your internet password  xxxxxxxxx 

4 Finish for important configuration and move scroll down for click "Apply"

5. Check the configuration again on the record of web page. if not correct click "Edit" 

6. Check your status of internet at status button from top right menu. 

6.1 Go to INTERNET INFO to check your internet   

                 look at Internet Connection status = connected

Note: if not success check your DSL configuration, VCI, VPI or username again 

7. Hope your can setting internet.

Setting ADSL Modem Router Wi-Fi -Dlink

Check and Setting ADSL Modem Router Wi-Fi  (by Wizard)
(Model Dlink DSL-2750E) 

1. After bought ADSL Modem Router WiFi.

1.1 Check Serial Number / Modem and warranlty from Box 

2. Check back side of Box and look technical information (Network Diagram)

3. Check items include with package

3.1 CD install  

3.2 Quick install manual

3.3 Ethernet Cable (Length ~ 50 cm)

3.4 phone cable

3.5 Power Adapter

3.6 Spritter (sparate phone and ADSL outlet)

And support Microsoft Windows and Mac OS X or Linux, Browser Internet Explorer, Mozila Firefox or other but not show on box.  

3.7 Check main feature 

      1) Support Wireless 802.11 b/g/n

      2) Network Address Translation (NAT)

      3) Enhanced Security with WPA2 (Wireless security)

      4) Dynamic DDNS

      5) Others

4. Record Serial Number and Model into notebook or take a photo for warranty on the further

5. Preparing CD for install and take CD into computer on DVD-Drive

6. Connect the Ethernet cable from computer to ADSL Modem router 

7. Power on the ADSL Modem Router and click "Next" (Please follow step by step)

8. Configuration, Put your country and ISP mean Internet band 

8.1 Example configuration

Country: Thailand

ISP: TRUE

Protocol: PPPOE

Encapsulation: LLC

VPI: 0

VCI: 100 (if not sure, check with call center of provider)

(3BB VPI=0 ; VCI=33)
(HINET VPI0; VCI=66) 

9. Put username and password into ADSL Router Modem software for access internet  (if not sure, check with call center of provider) 

 10. Confiuration Wireless Network SSID
(example your name or depend on your create)
Channel 0-11 : 2 
Ecryption (Optional) WPA2-PSK
WPA2 Key (This mean password) : landmark1234
Click Next

11. Waiting process

12. Success. check message and test internet now

13. Check status ADSL modem router, look on right side and  2 LED lights mean ADSL signal ( Left) and success to connect Internet (Right)

If only ADSL signal show and Internet off mean connection setting wrong please check username or password, VCI,VPI and Internet band) 

If ADSL blinking may be no ADSL signal or replace the connection (Remove fax and test again) 

14. Thank you for learning and hope success.

Schedule Defreg on Windows 7

Schedule  defragmentation on Windows 7 / Server 2008 

1. Go to Computer and right click on D: drive then found D-drive properties.

1.1 Click "Defragment now" in defragmentation  

Figure1

2. Window of disk defragmenter will show by suddenly.

2.1 Click configure schedule (if you want manual just choose drive and click defreg button)

Figure2

3. "Modify Schedule" page

3.1 Click "Run on a schedule" to enable your defrag schedule

3.2 Frequency: you can choose Daily, Weekly and Monthly (In my experience choose Weekly)

3.3 Day: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday and Sunday (Recommend: Friday or Saturday)

3.4 Time: 00:00 AM to 11:00 PM  (Recommend: Morning time because you turn on computer and go to have some breakfast)

Figure3

4 Disks: Click on "select disks button" and  choose your drive on the select disk page (example = D)

Figure 4

 5. Click "Close to finish schedule"

Figure 5

6. Enjoy your setting !

Install IIS web service on Windows 7 Professional SP1

Install IIS web service on Windows 7 Professional SP1

 1. Go to control Panel > Programs and Feature > Turn on Windows feature on or off

Figure1:Turn on Windows feature on or off

2. Click IIS check box to enable IIS service follow my testing on the figure3 

 2.1 Web Management Tools
     2.1.1  IIS6 Management Compatibilty
   a) IIS6 Management console
    b) IIS6 Scripting Tools
    c) IIS6 WMI Compatibility
    d) IIS Metabase and IIS6 configuration compatibility

     2.1.2 IIS Management console
     2.1.3 IIS Management Scripting Tools
     2.1.4 IIS Management Service

2.2 World Wide Web Service
     2.2.1 Application Development Feature
     a) .NET Extensibility
     b) ASP
     c) ASP.NET
     d) ISAPI Extension
     e) ISAPI Filters
     f) Server-Side Includes

    2.2.2 Common HTTP Feature
         a) Default Document
         b)  Directory Browsing
         c) HTTP Errors
         d) Static content
    2.2.3 Health and  Diagnostics
         a) Custom Logging
         b) HTTP Logging
         c) Logging Tools
        d) Request Monitoring
    2.2.4 Perfomance Feature
        a) Static content compression
    2.2.5 Security
      a) Basic Authentication
      b) IIS client certificate
      c) Request filtering
      d)  Windows authentication

Figure2: IIS feature

3. Wait IIS processing

Figure3: Wait IIS processing

4. Open Internet explorer and type http://localhost or http://your ip address

Figure4: Testing IIS7 is work

Create system restore point and restore your created point for Windows 7

Create system restore point and restore your created point for Windows 7 

สร้าง system restore point และเรียก  restore your created point for Windows 7 

1. Open system properties from right click at Computer and click tab "System Protection"

1.1 The default of this system is D Drive "off" and C Drive "On"  (Include Windows)

1.1.

2. Check C drive configuration by click at configuration and see on right page of picture show current usage 3.06 GB.

2.1 The restore setting already set to "Restore system setting and previous version of files" but if you set turn off system protection then you will  can't restore point when windows not working.
2.2 That mean have system restore point already but we dont know what is schedule.

3.Back to main-page and click D drive in Avariable Drive and click Configuration.

3.1 D Drive is turn off system protection  then click cancel

4. from the main page of system protection click "Create..."  and see new window then put your a restore point name 

5. My example for point name is "Test-create-restore1"

6. Press Create and waiting system process.

7. Successfully.

8.  from main-page click system restore and the other window click "choose a different restore point"

9. You will see your create restore point show on top record with "description name" and "manual type" then click your record and next (you can choose the restore before have some problem)

10. Before click finish please note the system will restart to restore point but make sure date and time is before problem.

10.1 For the data on D Drive and C Drive will not lost from system restore but in windows folder or some profile choose move to another disk     

10.2 wait about 5-10 minutes
10.3 Hopefully useful for you.